Packaging responsibility

Compliance with PPWR regulations

Our approach

  • Documentation of packaging components per product group
  • Compliance with the EU Packaging & Packaging Waste Regulation (PPWR)
  • Support for proper disposal through transparent material labeling

For secondary packaging, we use food-grade materials wherever technically feasible. Primary packaging, as part of a medical device, is subject to specific regulatory requirements.

Shipping packaging profile

Cardboard shipping packaging:

Art.:
510.011 – 229 × 189 × 121 mm
510.050 – 337 × 232 × 130 mm
510.051 – 340 × 240 × 260 mm
10.074 – 392 × 292 × 284 mm
520.026 – 392 × 292 × 282 mm
520.041 – 486 × 386 × 272 mm

Fefco 0201

Supplier: Swisspack AG
https://swisspackag.ch

Bubble wrap:

Art.: 82510012

Bubble wrap (HDPE), thickness 25 µm, recyclable

Supplier: Timpaco GmbH
https://timpaco.de/Luftpolster-Cirrus/FVL-Luftpolster

Bubble wrap:

Art.: 194.050

Bubble wrap made of polyethylene (LDPE), 45 µm, recyclable

Supplier: MEDEWO AG

https://www.medewo.com/ch/luftpolsterfolie-45-mym-extra-light

Adhesive tape:

Art.: 1510351

Adhesive tape, polypropylene (PP)

Supplier: BRACK

https://www.brack.ch/tesa-klebeband-set-50-mm-x-66-m-1510351

Packaging profile
Composite Tips & Syringes

Applies to the following products:
  • apt tip A1, A2, A3, A3.5/B4
  • els tip A1, A2, A2 op., A3, A3 op., A3.5/B4, A4, A4 op., B1, B2, B3, C2, C3, C4, D3, RB, IT, SW
  • els syringe A1, A2, A2 op., A3, A3 op., A3.5/B4, A4, B1, B2, B3, C2, C3, C4, D3, RB, IA, IB, IT, SW-, SW, SW+, SW++
  • els flow tip A1, A2, A3 op., A3.5/B4
  • mhc syringe Bright, Classic, Warm

Component

Packaging component

1. Heat-sealed bag (D500119, D500118)

2. Label for heat-sealed bag (D600220)

3. Flowchart (D600202, D600159, D600289)

Packaging component
  1. PE/EVOH composite film
  2. Paper FSC® Mix Credit – certificate SQS-COC-100818
  3. 300 g/m², supersilk + ultra-smooth, super white, wood-free, matte laminating film

Deviations

-

Packaging profile
Flowable Syringes

Applies to the following products:
  • apt flow syringe A2, A3
  • els flow syringe A2, A3, A1, A2, A3, A3
    op., A3.5/B4, A4, B1, C2, SW, W op./SW++
  • els paintart white, yellow, brown, grey, blue, red, incisal
  • els bulkfill transparent
  • els seal syringe transparent, white opak
Component
Packaging component
  1. Minigrip bag (D500008)
  2. Flow dispensing tip (D200022)
  3. Heat-sealed bag (D500119, D500118)
  4. Label for heat-sealed bag (D600220) 5. Flowchart (D600202, D600159, D600289)*

Packaging component
  1. Polyethylene (LDPE), recyclable
  2. Ethylene-vinyl acetate copolymer, oxidation inhibitors, vinyl acetate
  3. PE/EVOH composite film
  4. Paper FSC® Mix Credit – certificate SQS-COC-100818
  5. 300 g/m², supersilk + ultra-smooth, super white, wood-free, matte laminating film
Deviations

- Flowchart not included in els paintart, els bulkfill and els seal.

Packaging profile
Dental Gems

Applies to the following products:
  • saremco dental gems diamond crystal, shimmershell, ruby, aqua marine, sapphire
Component
Packaging component
  1. Lid for round gems container
  2. Round gems container, transparent (D200023)
  3. Lid insert els gems (D600114)
  4. Heat-sealed bag (D500118) 5. Label for heat-sealed bag (D600220)






Packaging component
  1. Polystyrene (PS)
  2. Polystyrene (PS)
  3. 300 g/m², supersilk + offset, ultra-smooth, high white, wood-free, matte laminated
  4. PE/EVOH composite film
  5. Paper FSC® Mix Credit – certificate SQS-COC-100818
Deviations

-

Packaging profile
csp ceramic silane primer kit

Applies to the following products:
  • csp ceramic silane kit
Component
Packaging component
  1. Mixing well plate (D200039)
  2. Flowchart (D600132)
  3. Heat-sealed bag (D500118)
  4. Label for heat-sealed bag (D600220)
Packaging component
  1. Polyethylene (monomer: ethylene, ref. no. 16950)
  2. 300 g/m², supersilk + ultra-smooth, super white, wood-free, matte laminating film
  3. PE/EVOH composite film
  4. Paper FSC® Mix Credit – certificate SQS-COC-100818
Deviations

-

Packaging profile
els cem

Applies to the following products:
  • els cem syringe
Component
Packaging component
  1. Heat-sealed bag (D500119)
  2. Flowchart (D600133)
  3. Minigrip 90 x 110 (D500163)
  4. Package insert els cem (D600138)
  5. Mixing tip, pointed (D500159)
  6. Mixing tip, straight (D500171)
  7. Intra-oral tip (D500170)
  8. White label (D600220)
Packaging component
  1. PE/EVOH composite film
  2. 300 g/m², Supersilk, extra smooth, ultra white, wood-free, matte lamination fil
  3. Polyethylene (LDPE), recyclable
  4. 300 g/m² Supersilk + offset, extra smooth, high white, wood-free
  5. Mixing tip housing: PP BORMED RF830MO NATURAL (MED) Mixing element: HOSTAFORM C 52021 NATURAL Retaining ring: PP BORMED RF830MO NATURAL (MED)
  6. Mixing tip housing: PP BORMED RF830MO NATURAL (MED) Mixing element: HOSTAFORM C 52021 NATURAL Retaining ring: PP BORMED RF830MO NATURAL (MED)
  7. PE natural
  8. Paper FSC® Mix Credit – Certificate SQS-COC-100818








Deviations

-

Packaging profile
kits

Applies to the following products:
  • els economy kit - tips A1, A2, A3, A3 op. A3.5/B4, B2
  • els flow economy kit - syringe A1, A2, A3 op., A3.5/B4, B1, C2
  • els paintart economy kit white, yellow, brown, grey, blue, incisal
  • saremco applicator
Component
Packaging component
  1. Flowchart (D600159)
  2. Thermoformed tray kit, white (D500138)
  3. Lid/Base (D500125)4. Lid insert kit (D600119)
  4. Base insert (D600115)
  5. Neutral label 140 x 24 (D600153)7. Label for heat-sealed bag (D600220)
  6. Shrink film
Packaging component
  1. Packaging component
  2. 300 g/m², Supersilk, extra smooth, ultra white, wood-free, matte lamination film
  3. APET (A-PET)3. APET (A-PET)
  4. 300 g/m² Supersilk + offset, extra smooth, high white, wood-free
  5. 300 g/m² Supersilk + offset, extra smooth, high white, wood-free
  6. Paper FSC® Mix Credit – Certificate SQS-COC-100818
  7. Paper FSC® Mix Credit – Certificate SQS-COC-100818
  8. Thermoplastic shrink film based on polyolefin (POF)
  9. Polypropylene + silicone

Deviations

- els paintart economy kit, saremco applicator do not contain flowchartsels economy kit

- tips, saremco applicator do not contain dosing syringe Flow

Packaging profile
adhesives

Applies to the following products:
  • cmf prime and bond 1 Flasche oder 4 Flaschen
  • els unibond
  • els duobond
  • apt unibond
  • zirconia primer
  • peek primer
  • csp ceramic silane base
  • csp ceramic silane activator
  • james-2
Component
Packaging component
  1. Flowchart (D600159)
  2. Heat-seal bag (D500118)
  3. Minigrip bag (D500008)
  4. White label (D600220)
  5. Instructions for use cmf etch (D600165)
  1. 300 g/m2, Supersilk + offset, extra smooth, super white, woodfree, matte lamination film
  2. PE/EVOH composite film
  3. Polyethylene (LDPE), recyclable
  4. Paper FSC Mix Credit, certificate SQS-COC-100818
Deviations

- Zirconia primer and peek primer do not contain flowcharts

_

Applies to the following products:
  • cmf etch refill syringe
  • microcid etch refill syringe

Component

Packaging components

  1. Flowchart (D600159)
  2. Tubular film (D500116)
  3. Minigrip bag (D500008)
  4. Dispensing tip, blue (D200016)
  5. White label (D600220)
  6. Instructions for use cmf etch (D600165)

Packaging components

  1. 300 g/m2, Supersilk + offset, extra smooth, super white, woodfree, matte lamination film
  2. PE
  3. LDPE
  4. Polypropylene
  5. Paper FSC Mix Credit, certificate SQS-COC-100818
  6. Material 60 g/m2, Z-offset + offset preprint, matte, super white, woodfree

Verpackungsprofil
3D Druckmaterialien

Gilt für folgende Produkte:
  • saremco print CROWNTEC
  • saremco print DENTURETEC

Bestandteil

Verpackungsbestandteil

1. Faltschachtel

2. Produktetiketten (3 Stück)

3. Versandkarton

4. Versandetikette

EIngesetztes Rohmaterial

1. Karton (Chromoduplexkarton GD2 / E-Welle)

2. Papier FSC® Mix Credit (SQS-COC-100818)

3. Wellkarton

4. Papier

Abweichungen

-

_

Verpackungsprofil
Reinigungslösungen

Gilt für folgende Produkte:
  • saremco print CLEANING CONCENTRATE

Bestandteil

Verpackungsbestandteil

1. Kanister 3 L

2. Schraubverschluss

3. Produktetikette

4. Versandkarton

5. Versandetikette

Eingesetztes Rohmaterial

1. HDPE (High Density Polyethylene)

2. Polypropylen (PP)

3. Papier

4. Wellkarton

5. Papier

Further information

Do you require further information on individual packaging components or regulatory aspects?

We will gladly provide detailed documentation and material-specific data upon request.

Contact us, we support you with transparency and reliability.

Contact us