X
SMART CHAIRSIDE RESTORATIONS.
CROWNTEC in combination with Ceramix-Nano, the compact all-in-one 3D printing system from SHINING 3D - for a clean workflow for fabricating permanent restorations.
Chairside Fabrication in Daily Practice
Less Equipment Setup
Printing and post-curing are integrated into the Ceramix-Nano system, eliminating the need for a separate curing unit.
Greater Clinical Practicality
The compact design simplifies integration into existing practice environments and lowers the barrier to chairside-oriented workflows.
Clear and Clean Workflow for the Team
Cartridge, printing, cleaning, and post-curing follow a logical and traceable workflow, supporting teams implementing digital manufacturing in a structured manner.
From Scan to Final Restoration
CROWNTEC within the Ceramix-Nano workflow combines digital planning, clean 3D printing, and post-processing in a compact chairside workflow. The printing time for a single crown is approximately 10 minutes, with post-curing performed within the system.
Guidance for Chairside Planning
Scanning & Designing
The case is captured digitally, the restoration is designed with AI support and then transferred to the printer. Everything is designed to be user-friendly.
Printing
Insert the CROWNTEC cartridge, start the print job, and remove the restoration after approximately 10 minutes.
Finalizing
After printing, post-processing, integrated post-curing within the Ceramix-Nano system, and preparation for placement are carried out.
Material Foundation
Scientifically Validated
saremco print CROWNTEC forms the material foundation of the clinical cartridge workflow. As a CE-marked and FDA-cleared medical device for permanent dental restorations, CROWNTEC combines regulatory compliance, scientific documentation, and SAREMCO's material expertise.
CE-Marked and FDA-Cleared
saremco print CROWNTEC is a CE-marked and FDA-cleared Class II/IIa medical device for permanent dental restorations.
Scientifically Documented
CROWNTEC is scientifically documented as a material for digital restorative workflows and is referenced hundreds of times in databases such as PubMed and Google Scholar.
SAREMCO Material Expertise
As a developer and manufacturer of dental restorative materials, SAREMCO contributes its material expertise directly to the new cartridge workflow.
Latest Workflow Version
For this project, CROWNTEC is used in its latest version optimized for the cartridge workflow.
The Cleaner Path to Chairside Restorations.
Material Foundation for Permanent Restorations
CROWNTEC is intended for permanent dental restorations, including molar crowns, anterior crowns, inlays, onlays, and no-prep or prep veneers.
Cartridge Instead of an Open Resin Vat
The cartridge reduces direct handling of liquid material and feeds CROWNTEC into the printing process in a controlled manner. This creates a cleaner, more traceable workflow without permanently open and odor-emitting resin vats.
Handling
Less open material handling
The cartridge logic reduces open handling of liquid printing resin and supports a clearly guided clinical process.
System
No resin vat in the drawer
Material does not have to be kept as a larger residual quantity in an openly filled resin vat when no printing is taking place.
Getting started
For practices that want a clean start
The guided cartridge workflow lowers the entry barrier for teams that want to integrate chairside 3D printing into their practice in a structured way.
Established indications. New chairside workflow.
SINGLE CROWN
- Anterior crowns
- Molar crowns
UP TO 3 CROWNS PER CARTRIDGE
- Up to 3 single crowns
- Efficient material use
- Suitable for compact print jobs
Inlays & onlays
- Inlays
- Onlays
- Partial restorations
Veneers
- No-prep veneers
- Prepped veneers
Temporary 3-unit bridges
- Temporary 3-unit bridges
- Multi-unit restoration
Frequently asked questions about saremco print CROWNTEC in the cartridge workflow
-
The Ceramix-Nano workflow with CROWNTEC cartridges is intended for digitally oriented dental practices, clinics, and clinicians that want to integrate a compact chairside workflow for permanent restorations into everyday practice. The focus is on clinical teams that want to use digital fabrication in a structured, space-saving, and traceable way.
-
The Ceramix-Nano CROWNTEC cartridge workflow is intended for permanent crowns, inlays, onlays, and veneers as well as temporary 3-unit bridges up to approx. 38 mm. The respective approved product documentation, instructions for use, and regulatory information for the cartridge workflow are binding.
-
SAREMCO recommends manual cleaning, alternatively with saremco print Cleaning Concentrate. Detailed cleaning information can be found in the respective current instructions for use.
-
No. The Ceramix-Nano system has an integrated validated curing unit. Printing and post-curing are therefore combined in a compact system approach, without a separate external curing unit.
-
saremco print CROWNTEC forms the restorative material basis of the cartridge workflow. In the SHINING 3D Ceramix-Nano system, CROWNTEC is embedded in a guided process logic — from cartridge to printing, cleaning, characterization, and post-curing.
-
Known process times are 12 minutes printing time and 300 seconds post-curing in the Ceramix-Nano system. Additional steps such as design, cleaning, characterization, polishing, and clinical procedures may vary depending on the case and workflow.
-
One sales unit comprises one blister with 3 CROWNTEC cartridges. One cartridge is designed for up to 3 crowns, depending on indication, restoration size, and processing.
-
CROWNTEC in cartridges for Ceramix-Nano will be available from September 2026. It will be supplied directly through SHINING 3D Dental and the respective dealer network. Further information on the Ceramix-Nano workflow with CROWNTEC, documentation, and regional availability can be requested via the information form.
Information request
Discover the chairside workflow with CROWNTEC and Ceramix-Nano
Receive more information about the chairside workflow with saremco print CROWNTEC and SHINING 3D Dental Ceramix-Nano. The form is provided by SHINING 3D Dental; your request will be handled directly by them or by the responsible system partner.
Request information about the CROWNTEC cartridge workflow
Get information on indications, application, and material properties
Request a demo, consultation, or system information from SHINING 3D Dental